Making your own hollow wood surfboard might be a fantastic starting point for investigating different surfboard construction methods and materials.
Making your own hollow wood board also helps you appreciate some of the really, really lovely wood boards that you may discover online, on Instagram, or in nature.These things can be made with some serious skill, creating a work of art that you can surf.However, you don’t have to go completely bonkers; a hollow wood surfboard that looks acceptable may be made rather easily.
Your first soft board success or failure really depends on your planning, measuring, patience, and sanding.
You can use this page as a guide to construct your own hollow wood surfboard.
These instructions assume you want to build one from scratch without using any kits, instructions, or other resources. All you need is your creativity, some planning, some lumber, tools, and time.
There are many hollow wood surfboard kits available, and they often include all of the following or part of them:
- templates you can print.
- pre-cut ribs and a spine.
- rails for the bead/cove.
- both resin and fiberglass.
- Venting equipment.
Most likely, you’ll need to procure the wood for your deck and bottom on your own. For a hollow wood board, the following options are suitable:
Tools and Materials for Making a Hollow Surfboard
To make a hollow wood board, you don’t need much; in fact, for your first attempt, we advise keeping things as straightforward as possible.
You’ll need the following materials to make your hollow board:
- For the internal frame, use plywood that is 18″ or 14″ thick.
- The deck, bottom, and rails will be constructed out of 1″–3″ broad by 4″ thick wood planks.
- As long as the wood is somewhat light and flexible, it doesn’t really matter what kind you use.
- The kind used for garden borders and other things can usually be found in the lumber or outdoor section of your neighborhood large box hardware store. You can constructyour first board using this.
- water-resistant wood glue
- fiberglass fabric
- glass fiber rope.
- acrylic resin.
- Vent – (screw, brass thread insert, o-ring) (screw, brass thread insert, o-ring).
The equipment you’ll require is somewhat ambiguous, although you can utilize
- To design the board and print the frame template, use a computer and printer.
- Table saws or bandsaws.
- Router desk.
- Iron is used to steam-bend rails.
- Sanding belt.
- Sander with variable speed.
- Clamps, clamps, clamps. – Various-sized spring clamps and bar clamps are also available.
Making a hollow wood surfboard requires a lot of planning and preparation.Being able to surf something you created really makes you consider how various design components work together to perform in the water.
Your first hollow wood surfboard will likely be a little heavy and awkward to ride, but it will look awesome, you’ll be super psyched about it, and if you find out how to do it right, it will feel like nothing you’ve ever felt before.
