=”automated turret punch press machines in excellent condition”>
Maintaining your turret punch press machine, even if this is AMADA turret punch tooling that normally flaunts excellent performance for years to come, is essential for ensuring an accurate and efficient production. With proper care and upkeep, you can extend the life of your machine and keep it running smoothly. So, in this blog post, we will provide 3 essential tips on how to easily achieve this.
Regularly Clean Your Turret Punch Tooling
First of all, you should understand that regular cleaning will help you prevent potential problems with your tooling, which can cause delays and costly repairs. And, cleaning in this case implies that your turret punch tooling must be free of debris and dust on a permanent basis when not in use. And, when it comes to the process itself, use hot water, a clean cloth, and either a non-alkaline cleaning solution or 95% isopropyl alcohol to start wiping the machine down. By the way, a common dishwashing detergent will do as well. After wiping down the surfaces, it’s time to move on to more intense cleaning. For doing so correctly, make use of a brush to remove any residue that has built up over time on the punches and dies. And, when choosing a brush, remember to get a soft-bristled one that provides gentle pressure so as not to damage the tooling in any way.
Lubricate Your Turret Punch Tooling
The next important step in maintaining your press machine is to regularly oil or lubricate it with high-quality lubricant. This will also help keep it in good condition and reduce wear and tear over time. To properly lubricate the machine, use a light lubricant designed specifically for such tooling and apply it according to the manufacturer’s instructions. But, on average, the turret punch press should be lubricated every time before and after use. Before use means that you need to apply lubricant to the top part of the tooling, as well as the bottom, which contacts the workpiece. After use indicates that you have to wipe off any excess oil or lubricant on the tooling and re-lubricate if necessary. One vital insight to bear in mind, make sure to clean off the old lubricant before applying a new one so that the new lubricant could properly coat the tooling and thus, reduce friction and overheating when in operation.
Store Your Turret Punch Tooling Properly
Even though some people underestimate this, properly storing your turret punch tooling is just as important as regularly cleaning and lubricating it. So, when not in use, you should store your machine in a cool, dry place that is away from direct sunlight and humidity. Why do so? Well, direct sunlight can lead to the rapid aging of your tooling’s surface finish while excessive moisture or humidity can cause rust and corrosion.
It’s also a good idea to keep all parts of your press organized in labeled containers to protect them from dust, dirt, and other environmental contaminants. And, to do so, make sure the containers are properly sealed and aren’t stacked too high. At the same time, store sharp edges in containers that are marked “Dangerous” and only handle them when wearing proper safety equipment. And, if you must store your turret punch tooling outdoors, make sure to cover it with a waterproof tarp or other weatherproof covering.
Bottom Line
Keeping your turret punch tooling in top condition is essential for any successful manufacturing operation. Regular cleaning, lubricating, and proper storage are all key to maintaining the lifespan and efficiency of your press. So, take the time to do the tasks, as mentioned above, on a regular basis to prevent costly repairs down the road and increase the overall productivity of your instrument! For more information on Latest Tech News UK please visit Tech New UK.
